Amplifiers

If you want to get the maximum performance from your loudspeakers and subwoofers, definitely add a Polk PA D amplifier or two. We offer 2-channel, 4-channel, 5-channel and monoblocks. Each PA amp is styled lean and plays meaner, with enough big, fat juicy watts to drive your system so you get to hear all of your music, no matter where and how loud you like to play.

PA330.2 2 Channel Amplifier

High-performance 2-channel mobile audio amplifier

The PA 330.2 is a two-channel class A/B amplifier with built-in fully variable high-pass and low-pass crossover capable of producing 75 Watts x 2 RMS continuous power @ 4 ohm. It’s also capable of bridged one-channel operation with a maximum power of 300 Watts into 4 ohms.

RRP $299.00 AUD

Product Manual

Speaker level input connects 2 ohm stable stereo operation is capable of driving virtually all automotive speakers.

High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.

Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.

6-way Smart System Protection (SSP) circuits

Selectable 12 dB/octave high or low-pass crossover with fixed crossover frequency.

Switchable 3-position bass boost (0dB, 6dB, 12dB) for extra bass thump.

Variable input gain optimizes match with different signal sources (175mv to 8V).

RCA outputs for easy daisy chaining of other amplifiers.

Mounting hardware with rubber isolation grommets and extra fuse included.

Light bar/fan output-connect an optional LED light bar or cooling fan for custom installations.

Multi-color status LED gives instant information on amplifier operation.

Electrical

Total Frequency Response 10Hz-30kHz 
Signal-to-noise (Referenced to rated power) 80 dBA
Remote Gain no 
Minimum Impedance Bridged 4 ohm
Minimum Impedance Not Bridged 2 ohm
Protection Circuitry 25 Amp ATC fuse, reverse polarity, thermal and DC offset  
High Pass Filter
Filter Slope 12dB/oct 
Low Pass Filter
Filter Slope 12dB/oct 
Effective Damping Factor >100 
CEA2006 Rating 200 watts / 4 ohms
Input Impedance 15 k ohms
Max Sensitivity 175mV - 8 

Amplifier Specs

Channels
Channel Notes Bridgeable Class AB MOSFET 
Total Dynamic Power 300 watts
Bass Boost Characteristics 3-position(0,6,12dB) Hz
12V & Ground Cable Gauge 4AWG 

Shipping

Total Shipping Weight 6.70 pounds

Amplifier Power Specs

RMS Power at 14.4V
Watts per channel NOT bridged @ 1 kHz
4 ohms 75 watts
2 ohms 100 watts
Watts per channel bridged
4 ohms 200 watts
Dynamic Power at 14.4V
Watts per channel NOT bridged @ 1 kHz
4 ohms 150 watts
2 ohms 200 watts
Watts per channel bridged
4 ohms 300 watts